Resetting your Samsung Galaxy J6 can be a daunting task, especially when the touchscreen is not functioning properly. However, there are several methods you can use to reset your device without relying on the touchscreen. In this article, we will explore the different ways to reset your Samsung Galaxy J6 without touchscreen, including the reasons why you might need to reset your device, the preparation steps you should take before resetting, and the step-by-step instructions for each method.
Why Reset Your Samsung Galaxy J6?
There are several reasons why you might need to reset your Samsung Galaxy J6. One of the most common reasons is to resolve software issues, such as freezing, crashing, or slow performance. Resetting your device can also help to remove viruses and malware that may be causing problems. Additionally, if you are planning to sell or give away your device, resetting it to its factory settings can help to protect your personal data and ensure that the device is restored to its original condition.
Preparation Steps
Before you reset your Samsung Galaxy J6, there are several preparation steps you should take to ensure that the process goes smoothly. First, make sure you have backed up any important data, such as contacts, photos, and messages. You can use a cloud storage service, such as Google Drive or Samsung Cloud, to back up your data. Next, charge your device to at least 50% battery life to prevent it from running out of power during the reset process. Finally, remove any SD cards or SIM cards from your device to prevent any data from being lost or damaged during the reset process.
Method 1: Reset Using the Hardware Buttons
One of the easiest ways to reset your Samsung Galaxy J6 without touchscreen is to use the hardware buttons. This method is also known as a hard reset or force reset. To reset your device using the hardware buttons, follow these steps:
Press and hold the Volume down button and the Power button at the same time for at least 10 seconds. Release the Power button but continue to hold the Volume down button. Use the Volume down button to navigate to the Recovery mode option and press the Power button to select it. In the Recovery mode menu, use the Volume down button to navigate to the Wipe data/factory reset option and press the Power button to select it. Confirm that you want to reset your device by selecting the Yes option.
Method 2: Reset Using the Android Debug Bridge (ADB)
Another way to reset your Samsung Galaxy J6 without touchscreen is to use the Android Debug Bridge (ADB). ADB is a command-line tool that allows you to communicate with your device from your computer. To reset your device using ADB, follow these steps:
Connect your device to your computer using a USB cable. Enable USB debugging on your device by going to Settings > Developer options > USB debugging. If you are unable to access the Settings menu, you can enable USB debugging by pressing and holding the Volume down button and the Power button at the same time for at least 10 seconds. Open a command prompt or terminal window on your computer and navigate to the platform-tools directory. Type the command adb reboot recovery and press Enter to reboot your device into Recovery mode. In the Recovery mode menu, use the Volume down button to navigate to the Wipe data/factory reset option and press the Power button to select it. Confirm that you want to reset your device by selecting the Yes option.
Requirements for Using ADB
To use ADB to reset your Samsung Galaxy J6, you will need to meet certain requirements. First, you will need to have a computer with a USB port. You will also need to have Android SDK installed on your computer, which includes the ADB tool. Additionally, you will need to have a USB cable to connect your device to your computer. Finally, you will need to have USB debugging enabled on your device, which can be done by going to Settings > Developer options > USB debugging.
Method 3: Reset Using the Find My Mobile Feature
If you have a Samsung account and have enabled the Find My Mobile feature on your device, you can use this feature to reset your Samsung Galaxy J6 without touchscreen. To reset your device using the Find My Mobile feature, follow these steps:
Go to the Samsung Find My Mobile website and sign in to your Samsung account. Select your device from the list of available devices and click on the Unlock button. Click on the Factory reset button to reset your device to its factory settings. Confirm that you want to reset your device by clicking on the OK button.
Requirements for Using the Find My Mobile Feature
To use the Find My Mobile feature to reset your Samsung Galaxy J6, you will need to meet certain requirements. First, you will need to have a Samsung account. You will also need to have Find My Mobile enabled on your device, which can be done by going to Settings > Lock screen and security > Find My Mobile. Additionally, you will need to have a stable internet connection to access the Samsung Find My Mobile website.
In conclusion, resetting your Samsung Galaxy J6 without touchscreen can be a challenging task, but there are several methods you can use to achieve this. By following the steps outlined in this article, you can reset your device using the hardware buttons, the Android Debug Bridge (ADB), or the Find My Mobile feature. Remember to always back up your important data before resetting your device and to follow the preparation steps to ensure a smooth reset process.
| Method | Description |
|---|---|
| Hardware Buttons | Press and hold the Volume down and Power buttons to reset the device |
| Android Debug Bridge (ADB) | Use ADB to communicate with the device from a computer and reset it |
| Find My Mobile Feature | Use the Find My Mobile feature to reset the device remotely |
By understanding the different methods available to reset your Samsung Galaxy J6 without touchscreen, you can choose the method that best suits your needs and preferences. Whether you are looking to resolve software issues, remove viruses and malware, or simply restore your device to its factory settings, resetting your Samsung Galaxy J6 can be a effective solution.
What are the reasons for resetting a Samsung Galaxy J6 without a touchscreen?
Resetting a Samsung Galaxy J6 without a touchscreen can be necessary in various situations. If the touchscreen is damaged or unresponsive, and you need to perform a factory reset to restore the device to its original settings, you’ll have to rely on alternative methods. Additionally, if you’ve forgotten your screen lock password or pattern, and you’re unable to access your device, resetting it without a touchscreen can be a viable solution. In such cases, it’s essential to follow a step-by-step guide to ensure a successful reset process.
The process of resetting a Samsung Galaxy J6 without a touchscreen requires careful attention to detail and a thorough understanding of the device’s hardware and software. Before proceeding with the reset, it’s crucial to backup any important data, as the process will erase all content on the device. You can use the Samsung Smart Switch software to backup your data to a computer or an external storage device. Once you’ve backed up your data, you can proceed with the reset process, which involves using the device’s hardware keys to navigate through the recovery mode and initiate the factory reset.
How do I enter recovery mode on my Samsung Galaxy J6 without a touchscreen?
Entering recovery mode on a Samsung Galaxy J6 without a touchscreen requires the use of the device’s hardware keys. To do this, you’ll need to press and hold the Volume down and Power buttons simultaneously for at least 10 seconds. This will boot the device into recovery mode, where you can navigate through the menu using the Volume down button to scroll down and the Power button to select an option. It’s essential to be patient and gentle when pressing the buttons, as the device may take a few seconds to respond.
Once you’ve entered recovery mode, you’ll see a menu with several options, including “Apply update from ADB,” “Wipe data/factory reset,” and “Reboot system now.” To reset your device, you’ll need to select the “Wipe data/factory reset” option using the Power button. This will initiate the factory reset process, which will erase all data on the device and restore it to its original settings. It’s crucial to note that this process cannot be undone, so make sure you’ve backed up any important data before proceeding with the reset.
What are the risks associated with resetting a Samsung Galaxy J6 without a touchscreen?
Resetting a Samsung Galaxy J6 without a touchscreen can pose several risks, including data loss and potential damage to the device. If you’re not careful, you may accidentally delete important data or settings, which can be difficult to recover. Additionally, if you’re not familiar with the reset process, you may end up causing more harm to the device, such as bricking it or causing hardware damage. It’s essential to follow a step-by-step guide and take necessary precautions to minimize the risks associated with resetting your device.
To minimize the risks, it’s crucial to backup your data before proceeding with the reset. You can use the Samsung Smart Switch software to backup your data to a computer or an external storage device. Additionally, make sure you’ve removed the SIM card and SD card from the device to prevent any data loss or corruption. It’s also essential to follow the reset process carefully and avoid interrupting the process, as this can cause damage to the device. By taking necessary precautions and following a step-by-step guide, you can minimize the risks associated with resetting your Samsung Galaxy J6 without a touchscreen.
Can I reset my Samsung Galaxy J6 without a touchscreen using ADB?
Yes, you can reset your Samsung Galaxy J6 without a touchscreen using ADB (Android Debug Bridge). ADB is a command-line tool that allows you to communicate with your device and perform various actions, including resetting the device. To use ADB, you’ll need to enable USB debugging on your device and connect it to a computer using a USB cable. Once connected, you can use the ADB command-line tool to reset your device.
To reset your device using ADB, you’ll need to open a command prompt or terminal window on your computer and navigate to the platform-tools directory. From there, you can use the “adb reboot recovery” command to boot your device into recovery mode. Once in recovery mode, you can use the “adb shell” command to access the device’s shell and perform the factory reset. The command to perform a factory reset is “wipe data/factory reset,” which will erase all data on the device and restore it to its original settings. Make sure you’ve backed up any important data before proceeding with the reset, as this process cannot be undone.
How long does it take to reset a Samsung Galaxy J6 without a touchscreen?
The time it takes to reset a Samsung Galaxy J6 without a touchscreen can vary depending on the method you use and the amount of data on the device. If you’re using the hardware key method, the process can take around 10-15 minutes to complete. This includes the time it takes to boot into recovery mode, select the factory reset option, and complete the reset process. If you’re using ADB, the process can take longer, around 20-30 minutes, depending on the speed of your computer and the device.
The reset process involves several steps, including erasing data, resetting settings, and reinstalling the operating system. The device may restart several times during the process, and you may see a progress bar indicating the status of the reset. It’s essential to be patient and not interrupt the process, as this can cause damage to the device. Once the reset is complete, your device will boot up with the default settings, and you’ll need to set it up again from scratch. Make sure you’ve backed up any important data before proceeding with the reset, as this process cannot be undone.
What should I do after resetting my Samsung Galaxy J6 without a touchscreen?
After resetting your Samsung Galaxy J6 without a touchscreen, you’ll need to set it up again from scratch. This includes selecting your language, connecting to a Wi-Fi network, and setting up your Google account. You’ll also need to restore your data from a backup, if you’ve created one. It’s essential to be careful when setting up your device, as you may be prompted to install updates or apps, which can take some time to complete.
Once you’ve set up your device, you can start using it again. Make sure to check for any software updates and install them to ensure your device is running with the latest security patches and features. You should also check your device’s settings to ensure everything is configured correctly, including your screen lock, notification settings, and app permissions. Additionally, you may want to consider installing a screen protector or case to protect your device’s screen and prevent any further damage. By following these steps, you can ensure your device is running smoothly and securely after the reset.